gaseous-fuels Scope 1 (Direct)

Natural Gas (Pipeline)

Emission factor for natural gas delivered via pipeline for use in heating, cooking, industrial processes, and power generation. Natural gas is widely used across Australian commercial and industrial facilities.

Emission Factor Value

51.53

kg CO₂-e/GJ

The number this factor multiplies: GJ of gas off your gas bill

Most Australian gas bills charge on energy in MJ. Where a bill starts from cubic metres, the retailer converts with a heating value and a pressure factor printed on the bill. Use the billed MJ.

One GJ is 1,000 MJ. A per-GJ factor applied to an MJ figure overstates the result a thousand times.

Read next: Unit conversion errors in carbon accounting

Questions about this factor

What is the emission factor for natural gas in Australia?

The Scope 1 emission factor for pipeline natural gas is 51.53 kg CO₂-e per GJ, as published in the NGA Factors 2025 (Table 5).

How do I calculate emissions from natural gas?

Multiply your total gas consumption in GJ by 51.53 to get Scope 1 emissions in kg CO₂-e. If your gas bill is in MJ, divide by 1000 to convert to GJ first.

← Back to all emission factors

Get the quantities this factor multiplies, read off your own documents

Looking up a factor takes seconds. Getting the quantity off a concrete docket, a subcontractor invoice or a freight consignment, and proving later where it came from, is where Scope 3 reporting for AASB S2 breaks. Carbonly reads physical quantities off supplier documents, matches each line to an NGA or construction EPD factor, and keeps every number traced to its source document. Why Scope 3 breaks.

See it on your own invoices

Per-project pricing. Reply within business hours. Prefer email? hello@carbonly.ai