E10 Fuel (90% Petrol, 10% Ethanol)
Emission factor for E10 fuel blend commonly available at Australian service stations. E10 contains 90% petrol and 10% ethanol by volume.
Emission Factor Value
60.898
kg CO₂-e/GJ
The number this factor multiplies: litres of fuel, converted to GJ
Litres come off fuel card statements, bulk delivery dockets and refueller statements. Convert kilolitres to GJ with the energy content figure from the same NGA table, then apply this factor.
Transport and stationary use carry different factors. Diesel in a site generator and diesel in a truck on the road belong on different lines.
Questions about this factor
What is the emission factor for E10 fuel?
The Scope 1 emission factor for E10 fuel is 60.898 kg CO₂-e per GJ, lower than standard petrol due to the 10% ethanol content.
Get the quantities this factor multiplies, read off your own documents
Looking up a factor takes seconds. Getting the quantity off a concrete docket, a subcontractor invoice or a freight consignment, and proving later where it came from, is where Scope 3 reporting for AASB S2 breaks. Carbonly reads physical quantities off supplier documents, matches each line to an NGA or construction EPD factor, and keeps every number traced to its source document. Why Scope 3 breaks.
See it on your own invoicesPer-project pricing. Reply within business hours. Prefer email? hello@carbonly.ai